M800 Series Hand Operated Stackers

PRODUCT SPOTLIGHT

  • 2,000 lb. capacity
  • 50", 64", and 76" lift heights
  • 1-1/2" thick x 3" wide adjustable solid steel forks
  • Forks adjust from 6-1/2" to 26-1/2" O.D.
  • 14" high fork backs
  • Slip-on 32" x 30" platform available
  • Hand-operated pump features variable control hand release lowering
  • Lift rise approximately 1/2" per stroke
  • Perforated metal screen
  • Foot-operated floor lock
  • Dual leaf-type chain with 8250 lb yield point
  • High-impact, floor-saving phenolic wheels

Have a question or comment?

Please let us know your name.
Please let us know your email address.
Invalid Input
Invalid Input
Invalid Input
Please let us know your message.
Enter Letters and Numbers(*)
Enter Letters and Numbers RefreshInvalid Input

  • Model
    Number
    Load
    Capacity
    Load
    Center
    Raised
    Height
    Low
    Height
    Dimensions
    H x W x L
    Base Legs
    I.D./O.D.
    Wheel Dia.
    Front/Rear
    Shipping
    Weight
    M800 Series - Adjustable 30" Forks (Straddle)
    M852-2000 2000 lbs 18" 50" 3 ¼" 66 x 33 x 51" 26" / 32" 5" / 5" 460 lbs
    M866-2000 2000 lbs 18" 64" 3 ¼" 80 x 33 x 51" 26" / 32" 5" / 5" 480 lbs
    M878-2000 2000 lbs 18" 76" 3 ¼" 92 x 33 x 51" 26" / 32" 5" / 5" 500 lbs

    OPTIONS & ACCESSORIES

    • Wheels and Casters
      WHEELS & CASTERS
      Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.
    • Upside Down ForkREVERSED / INVERTED FORKS
      Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

    • SLIP-ON PLATFORMS
      Slip on platformPlatforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
      and 40" x 36" for 24" Load Centers
    • MODIFIED PLATFORMS
      B600 Special Slotted PlatformCustomized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
    • EXTENDED BACKPLATE
      Wide Back PlateWider of higher backplates to accommodate special lifting requirements.
    • BOOM WITH HOOK
      Boom with HookFork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.
    • RAM
      Ram
      A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

    • DRUM GRABBER DG-30
      Drum Grabber
      Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
    • ROLLER BED
      Roller Bed
      Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
    • P-6 DIE PULLER
      Die Puller
      Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
    • Photo To Come

      FIRE RESISTANT HYDRAULIC FLUIDS
      Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

    • Photo To ComeHEIGHT
      Standard lift heights can be decreased to meet special requirements.

Wheels and Casters

WHEELS & CASTERS
Standard wheels are phenolic plastic. Optional wheels are available.
Consult Sales for details.

 

 

Upside Down ForkREVERSED / INVERTED FORKS
Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

 

SLIP-ON PLATFORMS
Slip on platformPlatforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers and 40" x 36" for 24" Load Centers

 

MODIFIED PLATFORMS
B600 Special Slotted PlatformCustomized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.

 

 

EXTENDED BACKPLATE
Wide Back PlateWider of higher backplates to accommodate special lifting requirements.

 

 

BOOM WITH HOOK
Boom with HookFork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.

 

RAM
Ram
A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

 

DRUM GRABBER DG-30
Drum Grabber
Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.

 

ROLLER BED
Roller Bed
Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.

 

P-6 DIE PULLER
Die Puller
Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center

FIRE RESISTANT HYDRAULIC FLUIDS
Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

HEIGHT
Standard lift heights can be decreased to meet special requirements.

Share this product

AIS stamp orange black

Popular products are Always in Stock and ship in one week when you specify AIS on your purchase order.

More Info

Presto ECOA Contact

Email: sales@prestolifts.com
Telephone: 1-800-343-9322, 508-952-4000
FAX: 1-888-788-6496, 508-952-4001
FOB point: Manila, AR 72442
Corporate Office: 50 Commerce Way,
Norton, MA 02766