CW Series Counterweight Stackers

PRODUCT SPOTLIGHT

  • Lifting speed - 5" per second
  • Forks adjust from 6-1/2" to 20" O.D.
  • 15-1/2" high fork backs
  • Heavy-duty C100 foot-operated floor lock
  • 12V 75 amp hour WLA Battery
  • 1" thick x 3" wide adjustable solid steel forks
  • Hinged door with capacity display
  • LED dash mount – diagnostic display • 3 position “Comfort Cushion” push handle
  • Quick-connect battery cables

Have a question or comment?

Please let us know your name.
Please let us know your email address.
Invalid Input
Invalid Input
Invalid Input
Please let us know your message.
Enter Letters and Numbers(*)
Enter Letters and Numbers RefreshInvalid Input

  • Model
    Number
    Load
    Capacity
    Load
    Center
    Raised
    Height
    Low
    Height
    Dimensions
    H x W x L
    Wheel
    Diameter
    Shipping
    Weight
    CW Series - Adjustable 25" Forks
    C62A-200 200 lbs 13" 62" 1" 80 x 27 x 36" 5" x 5" 750 lbs
    C62A-400 400 lbs 13" 62" 1" 80 x 27 x 36" 5" x 5" 900 lbs
    C62A-600 600 lbs 13" 62" 1" 80 x 27 x 36" 5" x 5" 1000 lbs
    C62A-800 800 lbs 13" 62" 1" 80 x 27 x 36" 5" x 5" 1100 lbs
    C62A-1000 1000 lbs 13" 62" 1" 80 x 27 x 36" 5" x 5" 1200 lbs
    C74A-200 200 lbs 13" 74" 1" 92 x 27 x 36" 5" x 5" 775 lbs
    C74A-400 400 lbs 13" 74" 1" 92 x 27 x 36" 5" x 5" 925 lbs
    C74A-600 600 lbs 13" 74" 1" 92 x 27 x 36" 5" x 5" 1025 lbs
    C74A-800 800 lbs 13" 74" 1" 92 x 27 x 36" 5" x 5" 1125 lbs
    C74A-1000 1000 lbs   74" 1" 92 x 27 x 36" 5" x 5" 1225 lbs
    CW Series - Adjustable 30" Forks
    C62A-15LC 1000 lbs 15" 62" 1" 80 x 27 x 41" 5" x 5" 1450 lbs
    C74A-15LC 1000 lbs 15" 74" 1" 92 x 27 x 41" 5" x 5" 1475 lbs

    OPTIONS & ACCESSORIES

    • Wheels and Casters
      WHEELS & CASTERS
      Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details.
    • Foot ControlsREMOTE CONTROLS
      Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord 

    • Fifth WheelFIFTH WHEEL & TILLER
      Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.
    • Upside Down ForkREVERSED / INVERTED FORKS
      Ideal for overhead installation. Forks can be modified in an inverted position which effectively increases the stackers lowered height and raised height. 

    • SLIP-ON PLATFORMS
      Slip on platformPlatforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers
      and 40" x 36" for 24" Load Centers
    • MODIFIED PLATFORMS
      B600 Special Slotted PlatformCustomized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
    • EXTENDED BACKPLATE
      Wide Back PlateWider of higher backplates to accommodate special lifting requirements.
    • BOOM WITH HOOK
      Boom with HookFork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.
    • RAM
      Ram
      A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.

    • DRUM GRABBER DG-30
      Drum Grabber
      Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
    • ROLLER BED
      Roller Bed
      Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
    • P-6 DIE PULLER
      Die Puller
      Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center
    • Photo To Come

      FIRE RESISTANT HYDRAULIC FLUIDS
      Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

    • Photo To ComeHEIGHT
      Standard lift heights can be decreased to meet special requirements.
    • Photo To ComeAIR POWER
      Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).

WHEELS & CASTERS
Standard wheels are phenolic plastic. Optional wheels are available. Consult Sales for details. 
Wheels and Casters 
REMOTE CONTROLS
Powered Lift Stackers have control mounted adjacent to the push handle. Optional Remote Controls are available. Choose Hand Operated (RC) with a 10' or 20' coil cord, or Foot Control (FC) with a 10' cord.
 Foot Controls
FIFTH WHEEL & TILLER
Recommended for lifts with wide straddles of high load capacities. Consists of an 8" drive wheel and spring loaded tiller handle.
 Fifth Wheel

REVERSED / INVERTED FORKS
Ideal for overhead installation. Forks can be inverted which effectively increases the stackers lowered height and raised height. 

Upside Down Fork 

 

SLIP-ON PLATFORMS
Platforms slide on over existing forks. 3 Sizes are available - 24" x 24" for 15" Load Centers, 32" x 30" for 18" and 20" Load Centers and 40" x 36" for 24" Load Centers.

Slip on platform
MODIFIED PLATFORMS
Customized for a specific application, modified platforms include extended lengths or widths, cutouts, special shapes, floor level access, bridge plates, non-skid surfaces and more.
B600 Special Slotted Platform
EXTENDED BACKPLATE
Wider of higher backplates to accommodate special lifting requirements.
Wide Back Plate
BOOM WITH HOOK
Fork carriages can be equipped with a boom and hook for lifting and suspending loads with chains or lifting straps.
Boom with Hook
RAM
A Cylindrical Ram mounted to the fork carriage for handling rolls, and coils. Rams up to 30" long available.
Ram
DRUM GRABBER DG-30

Automatically grabs 30 or 55 gallon drums for hanling and stacking in the vertical position. Mounts on the back plate of any straddle base, fork model stacker. Parrot beak mechanism works with steel or fiber drums.
Drum Grabber
 
ROLLER BED
Excellent for transferring heavy object to or from a stacker with minimum effort. 3" rollers can be oriented front-to-back or side-to-side. Maximum capacity is 1,000 lbs. Requires a 24" load center.
Roller Bed
P-6 DIE PULLER
Roller bed equipped with a hand operated winch with cable and hook. Maximum Capacity is 1,000 lbs. Requires a 24" Load Center.
Die Puller

FIRE RESISTANT HYDRAULIC FLUIDS
Water and glycol fluids are fire resistant, non-explosive and non-toxic. Approved by Factory Mutual Insurance Engineering Laboratories.

 
HEIGHT
Standard lift heights can be decreased to meet special requirements.

 

AIR POWER
Air motor with hydraulic pump. I.5 GPM at 80 PSI and 80 CFM of free air with lift fully loaded. Includes a hand or foot control valve. (FRL not included).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Share this product

AIS stamp orange black

Popular products are Always in Stock and ship in one week when you specify AIS on your purchase order.

More Info

Presto ECOA Contact

Email: sales@prestolifts.com
Telephone: 1-800-343-9322, 508-952-4000
FAX: 1-888-788-6496, 508-952-4001
FOB point: Manila, AR 72442
Office: 2 Hampshire Street, Suite 102
Foxborough, MA 02035